The big shift is on at Ford Motor Company, as the automaker plans to more than
double the number – to 1.4 million – of fuel-efficient, 6-speed automatic
transmissions in its North American cars and trucks by the end of 2009.
The advanced transmissions provide customers 4 to 6 percent improved fuel
economy compared with typical 4- and 5-speed gearboxes, as well as better
acceleration and a quieter and more refined driving experience.
“Advanced six-speed automatic transmissions are an important element in our
sustainability strategy to improve fuel economy for our customers and reduce
greenhouse gas emissions by 30 percent in our new vehicles by 2020,” said Barb
Samardzich, Vice President, Powertrain Product Development. “They also deliver
improved acceleration and smoother shifting, all at a great value for
consumers.”
By the end of 2012, 98 percent of Ford’s North American automatic
transmissions will be advanced 6-speed gearboxes, maintaining the automaker’s
position as a leader of high-performance, fuel-efficient powertrains.
Less RPM, More MPG
Ford’s newest 6-speed is the 6F35, which debuts in the 2009 Ford Escape and
Mercury Mariner sport-utility crossover vehicles and replaces the current
4-speed. It also will be used in the 2009 Mazda Tribute, as well as two other
vehicles early next year.
For 2009, the Escape and Mariner receive more powerful engines, but even with
that improved power, they also increase their fuel economy by 1 mpg thanks to
the new 6F35.
Key to the new 6-speed transmissions is increased gear span compared with 4-
and 5-speeds. This allows vehicle powertrains to operate at a more optimum
level, depending on the particular driving situation.
“For example, a higher first gear delivers more torque when accelerating from
a stop while the deeper overdrive gear enables a vehicle’s engine to use less
energy at highway cruising speeds, which saves gas,” says Phil Yuhasz,
engineering director, Transmission and Driveline Engineering. “In addition, with
two more gears, a 6-speed transmission allows the engine to operate at its
optimum efficiency, for a greater period of time, further boosting fuel
economy.”
The 6F35 is produced at Ford’s Van Dyke Transmission Plant in Sterling
Heights, Mich., and will double the plant’s production capacity to 1.3 million
units annually. Van Dyke also assembles the 6F50 front-wheel-drive transmission.
Last year, 221,000 6F50 transmissions were produced for the Ford Taurus, Ford
Taurus X, Ford Edge, Mercury Sable and Lincoln MKX.
Quality Engineered
At 84.5 percent customer satisfaction, the 6F50 is three points above the
industry average for all transmissions, according to the first quarter 2008 U.S.
Global Quality Research System study conducted for Ford by RDA Group of
Bloomfield Hills, Mich.
Furthermore, both the Lincoln MKX and Ford Edge crossover vehicles won
numerous quality and customer satisfaction awards last year in their respective
categories, including Strategic Vision’s 2007 Total Value Index, as well as Auto
Pacific’s Vehicle Satisfaction Award and Ideal Vehicle Award. Edge also earned
an Automotive Performance Execution and Layout (APEAL) award from J.D. Power and
Associates.
This year, 6F50 application expands to the all-new 2009 Ford Flex and Lincoln
MKS. Available with SelectShift in the Lincoln MKS, the automatic transmission
also allows manual gear selection for an engaging and sporty driving experience.
Flexible for Added Fuel-Saving Technology
Ford 6-speed gear ratios also play a key role in the company’s new PowerShift
dual-clutch transmission. Currently used in the new European Ford Focus and Ford
C-Max, PowerShift combines the ease and permanent motion of a conventional
6-speed automatic transmission with the performance of a manual transmission. It
also delivers a fast and sporty shift while maintaining excellent shift
smoothness.
“These technologies are all about fuel economy,” said Craig Renneker, chief
engineer for new automatic transmissions, Ford Powertrain Operations. “And our
advanced 6-speed transmissions will mate perfectly with the new Ford EcoBoost
engines that are on the way.”
Six-Speed Centers of Excellence
The Van Dyke plant will serve as the company’s global center of excellence
for 6-speed front-wheel-drive transmissions, and the Livonia (Mich.)
Transmission Plant will assume the same role for rear-wheel-drive versions.
Livonia’s new 6R80 transmission helped power 154,000 SUVs last year,
including the Ford Explorer, Mercury Mountaineer, Ford Expedition and Lincoln
Navigator.
The 6R80 continues to improve in quality, showing a 76 percent reduction in
warranty claims from the 2007 to 2008 model years. This year, production of the
6R80 has been increased to accommodate the all-new 2009 Ford F-150 pickup.
The third center of excellence for Ford’s 6-speed manufacturing is its
Sharonville (Ohio) Transmission Plant, which produces gears and other
transmission parts for the Livonia and Van Dyke facilities.
A total investment of $658 million in the three plants was announced last
year, primarily for new flexible equipment to produce advanced 6-speed
transmissions.
Ford 6-speed automatic transmission Centers of Excellence:
6F35 Van Dyke (Mich.) Transmission
2009 Ford Escape
2009
Mercury Mariner
2009 Mazda Tribute
6F50 Van Dyke (Mich.) Transmission
2008 Ford Taurus
2008 Ford
Taurus X
2008 Mercury Sable
2008 Ford Edge
2008 Lincoln MKX
2009
Lincoln MKS
2009 Ford Flex |
6R80 Livonia (Mich.) Transmission
2008 Ford Expedition
2008
Lincoln Navigator
2008 Ford Explorer
2008 Ford Explorer Sport Trac
2008
Mercury Mountaineer
2009 Ford F-150
Sharonville (Ohio) Transmission
6R80 gears
6F35/50 gears
|
About Ford Motor Company
Ford Motor Company, a global automotive industry leader based in Dearborn,
Mich., manufactures or distributes automobiles in 200 markets across six
continents. With about 244,000 employees and about 90 plants worldwide, the
company's core and affiliated automotive brands include Ford, Lincoln, Mercury,
Volvo, Mazda, and until completion of their sale, Jaguar Land Rover. The company
provides financial services through Ford Motor Credit Company. For more
information regarding Ford's products, please visit: www.ford.com.